Waxes / Tuning Supplies
Designed for normal, freezing temperatures. New fallen snow: -2°C to -8°C (28°F to 18°F). Old fine grained snow: -4°C to -12°C (25°F to 10°F).
A flexible wax for temperatures around freezing and colder. New fallen snow: 0°C to -4°C (32°F to 25°F). Old fine grained snow: -2°C to -8°C (28°F to 18°F).
Designed for moist to dry snow around freezing. When used below freezing, high humidity is required. New fallen snow: 1°C to -2°C (34°F to 28°F). Transformed fine grained snow: 0°C to -5°C (32°F to 23°F).
Born out of World Cup demand. Tested and used at World Cup Competitions and the Utah Olympic Games. For slightly moist new snow around freezing, and for older transformed snow below freezing. It gives excellent grip without sacrificing glide. New fallen snow: 2°C to 0°C (36°F to 32°F). Old fine grained snow: 0°C to -3°C (32°F to 27°F).
Designed for wet snow with little water content. When used below freezing high humidity is required. New fallen snow: 2°C to 0°C (36°F to 32°F). Old fine grained snow: 1°C to 2°C (34°F to 28°F).
$26.99 - $69.99
Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp: 155°C (311°F). A new cold wax for dry friction conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.
$26.99 - $69.99
Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F). Our std. LF6 has been one of the greatest successes in the old Cera Nova system, and through comprehensive testing we haven’t found anything better.This wax is very versatile. Its area of use stretches from underlayer for Cera F powder, racing wax and base prep wax for cold skis. LF06X has a good durability and offers great performance on artificial snow.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.When used as a base for Cera F, we recommend the new FC06X powder.
-12ºC to -32ºC (12ºF to -26ºF). A pure white hydrocarbon powder for very cold conditions. Can be used alone or as a base for other waxes during abrasive conditions. Easier to apply and scrape than other cold conditions waxes. Recommended iron temperature setting of setting of 150-155ºC.
13 tpcm. Chromed Bastard removal/setup file. Best file for setting side angle. Non-tang files offer a truer, flatter file for exact degree application. Best file for initial side bevel. User level: Racing Pro World Cup
400 grit. 2nd in your must have diamonds to maintain a smooth and sharp edge. Starts to bring out that high polish shine.
-10ºC to -32ºC (14ºF to -25ºF). CH4 is slightly harder than HF4 and LF4. Can be used alone or mixed with other LF or HF waxes to increase durability on aggressive snow. In dry conditions can it be used up to -5ºC. (Is often used alone in World Cup Racing.) Should be scraped while still warm. Recommended iron temperature setting of 150ºC.
-6ºC to -12ºC (21ºF to 10ºF). For common cold conditions. Contains also some synthetic wax, which makes it durable in aggressive snow. Good training wax alone. It offers good glide plus base protection at an economical price. Recommended iron temperature setting of 140ºC.
+1ºC to -4ºC (34ºF to 25ºF). A very good, reliable and economical racing wax, as well as a general base prep wax and travel wax for “cold” skis. Recommended iron temperature setting of 120ºC.
Practical pocket sized all round brush.
Contents: V05 Polar, V20 Green, V40 Blue Extra hard waxes, synthetic cork and a groove scraper. Zippered pack.
-2ºC to -8ºC (28ºF to 18ºF). Very good race wax at low humidity. For racing at normal and high humidity Cera F FC7 is recommended as final overlayer. Recommended iron temperature setting of 135ºC.
+10ºC to 0ºC (50ºF to 32ºF). For very wet conditions. Also good for base preparation and to protect the bases when traveling. The snow is often dirty at the temperatures calling for LF10, therefore an overlayer of Cera F FC10 is recommended. Recommended iron temperature setting of 110ºC.
+1ºC to -4ºC (34ºF to 25ºF). The low-percent fluorocarbon counterpart to HF8. For racing it is recommended to use Cera F FC8 as the final overlayer within this temperature range. Also used very often as a wax for training, travelling and cleaning. Recommended iron temperature setting of 120ºC.
Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Output: 1000W
Reasonable and reliable waxing iron with temperature control showing the degrees. Standard iron plate. Control light for temperature regulation. 400 Watt.
Previous page Page 2 of 2