STORE LOCATION  LOCATION  |  M-F 10-9 | Sat 10-6 | Sun 12-5

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stages Cycling Cannondale Hollowgram Si
$849.99
This Stages Power meter is built on to a non-drive Cannondale Si crank arm specifically to pair with Cannondale's Hollowgram Si crank — 2014 or newer. The Stages Power meter will also mate to the Hollowgram SISL2 model crank. This Stages Power meter is slimmer and up to 28% lower profile than their original meter. It's also sleeker, with a 17-percent reduction in frontal area, and they've made it stronger. The housing design increases the strength of the battery door and housing connection by 200-percent over the previous design. - Accuracy: ± 2% - Weight: Only adds 20gr to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Stages Support section - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Training Peaks, Strava, Garmin Training Center and others
Wheels Manufacturing Inc. Freewheel/BB Spacer
$23.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
TruVativ X0 Chain Guide
$208.99
For chain consistency and control in technical situations, TruVativ teamed up with chain guide masters MRP to bring you the XO Chain Guide. It features an aluminum back plate and MRP's replaceable Skid Plate design so its amazingly lightweight, yet can take a beating. The combination of the upper and lower guides, along with a sealed bearing pulley provides excellent chain retention in the roughest terrain.
Race Face Alloy Crank Boot
$12.99 - $13.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Look Zed Chainring Bolts
$34.99
- Look, Zed, Chainring bolts
TruVativ 2X10 X-Guide
$166.99
For chain consistency and control in technical situations, TruVativ teamed up with chain guide masters MRP to bring you the 2X10 X-Guide. It features an aluminum back plate and MRP's replaceable Skid Plate design so its amazingly lightweight, yet can take a beating. The lower guide, along with a sealed bearing pulley provides excellent chain retention in the roughest terrain.
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$39.99
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Blackspire Bruiser Beavertail Bash Guard
$69.99
- Thermoplastic Beavertail protects chainring from impacts - For 1X and 2X drivetrains
Blackspire Einfachx Chain Guide
$63.99 - $69.99
- Simple but effective upper chain guide for 1x9/10sp applications - Captive hardware for easy installation and adjustment - Adjustable for 49.5-50.5mm chainlines - BB, ISCG, ISCG-05, E-type and Direct Mount (Shimano) mounting options - Fits 32-42t rings - 55-65g
e*thirteen by The Hive Chain Guide Lower Slider Kit
$25.99
- Lower slider replacement parts for E-13 chainguides
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$44.99
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$41.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$41.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$44.99
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Race Face Carbon Crank Boots
$12.99 - $13.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
SRAM Carbon Crank Arm Boot
$14.99
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
FSA BB30 Crank Bolts
$30.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$22.99
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Blackspire Single Ring Chain Guide Roller Kit
$11.99
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit blackspire single-ring roller chain guides
Blackspire C-4 Ring God Bash Guard
$39.99
- 3/8" thick Lexan for lightweight protection - Includes (4) 15mm male chainring bolts
Blackspire Cyclogod Bash Guard
$59.99
- Ultralight bashring for light duty: not designed for high impact - 1/8" thick chainring is ideal for single-chainring Cyclocross bikes - Anodized and laser-etched
Quarq DZero Power Meter Spider
$913.99
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero Spider represents the state of the art in power meter technology Meet the Quarq DZero Power Meter Spider—the DZero in spider form. Ready to pair with any Quarq Prime Power ready cranksets. - Bluetooth low energy technology and ANT+ wireless data transfer - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5%
TruVativ RockGuard
$57.99
Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
e*thirteen by The Hive Chain Guide Idler Pulley
$23.99
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
Race Face Next SL G4 Crank Boots
$12.99 - $13.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Wheels Manufacturing Inc. PF30 Adapter for 22/24mm Spindle Cranks
$47.99
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Blackspire Double Ring Chain Guide Roller Kit
$11.99
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit Stinger and Dewlie chain guides
TruVativ BashGuard
$57.99
Truvativ's BashGuard keeps your chainring(s) safe. It is designed to work with their BoxGuide chain guide (sold separately) for complete chain management. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
TruVativ Noir All Mountain Guard
$149.99
TruVativ's Noir All Mountain Guard is all-mountain chainring protection with feather-like weight. This carbon fiber guide is 4 bolt, 104 BCD compatible and protects 32-33T chainrings.
Page 1 of 2 Next page