Filter By:
- Parts & Accessories (63)
- Pedals (145)
- Flat Pedals (1)
- MTB Clipless Pedals (4)
- Road Clipless Pedals (8)
- Cleats (3)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pedals and Accessories

$5.99
- Protects cranks from damage caused by overtightening pedals
- Can be used for bike fit adjustments, dependent on pedal thread length engagement

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip

$9.99
- High impact Resin multi-use body with integrated cage
- Externally sealed ball bearing system
- 100mm x 82mm platform
- Weight: 316g pair (9/16")

$9.99
- High impact Resin platform with integrated pins
- Heat-treated Boron spindle
- Externally sealed ball bearing system
- Weight: 290g pair (9/16"), 360g pair (1/2")

$9.99
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.
$10.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$11.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes.
- Proportionally smaller platform size is perfect for smaller-sized feet
- Durable 7mm boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 9/16" / 1/2" axle options
- 300g per pair
- Dimensions: 93 x 87mm

$11.99
Lightweight, strong 1-piece Polypropylene thermoplastic body
- Tough 7mm boron steel axle
- Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal
- Fineline reflectors included (removable)
- 9/16" axle
- Dimensions: 110.5 x 100.5mm
- Black
- 301g per pair

$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$12.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads

$12.99
- Strapless resin construction
- Strapless design
- Tough and lightweight, ideal for urban conditions with frequent stops

$13.49
If your favorite ride leads to the beach or perhaps the grass at the local park, Electra's Barefoot Pedals are here. They feel the same way with their foot-friendly platforms and comfy plastic bodies. Treat your feet to smooth comfort with these durable platforms.

$13.49
Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.

$13.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$14.49
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes.
- Durable boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 309g per pair
- 9/16" / 1/2 axle options
- Dimensions: 100 x 86mm

$15.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance.
Includes:
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs

$17.99
Lightweight low-profile one-piece Polypropylene thermoplastic pedals
- Inlaid TPE non-slip rubber tread for unsurpassed grip
- Tough 7mm boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 230g per pair
- 9/16" axle
- Dimensions: 100 x 80mm

$17.99
Good things come in pairs.
Put your foot down!
Electra replacement pedals are perfect upgrades.
This updated design connects you to your bike with an efficient and lightweight pedal.
Product details:
- Nylon body
- 9/16" fits most bicycles with three-piece cranks
- Weight: 380g

$17.99
- Nylon pedal body with Kraton non-slip surface
- Comfortable for most shoe types
- 9/16" spindle
- Pedal Weight: 446g

$17.99
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface.
- Compatibility: KEO Grip/KEO Cleat
- Use: Protect the cleat

$19.99
- Forged alloy body with non-slip steel cage
- Heat treated Boron 9/16" axle spindle
- Sealed cartridge bearing system
- Weight: 240g pair (9/16")

$19.99
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

$19.99
9 Degrees Float
These cleats are specifically for Delta pedals. They are not compatible with Look Keo or Shimano SPD-SL cleats.
To be paired with shoes that have a 3 bolt triangular pattern.
Page 1 of 8
Next page