Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$0.10 - $0.15
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.

$0.15
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle

$1.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

$2.49 - $4.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$2.49
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

$3.99 - $79.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included

$3.99 - $11.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets

$3.99 - $11.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets

$4.49 - $12.99
Aluminum headset stack spacers precision-cut to ensure proper headset function.
- Precision-cut for proper function
- Inner Diameter: 28.9mm
- Outer Diameter: 34.4mm
- Precision-machined aluminum

$4.99
Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

$5.99
Mounts at dropout to prevent derailleur damage.
- Cut-outs allow smooth cable routing
- Durable steel construction

$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp.
- For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top
- One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time.
- 22.2mm / 7/8 fit with angle adjustment via serrated washers
- Steel construction with ED black finish

$5.99 - $8.99
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers.
- Thread: M5-0.8
- Overall Length: 8mm
- Material: Steel
- Use with 3mm hex wrench
- Bag of 5

$6.00 - $14.50
- Super light carbon spacers for tuning stem height
- Spacers are internally weight relieved to drop a few extra grams

$6.50
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.

$6.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
Page 1 of 25
Next page