Skip to main content
STORE LOCATION  LOCATION  |  M-F 10-5 | Sat 10-5 | Sun CLOSED

Filter By:

Glide Wax

Swix CH10X Yellow Hydrocarbon Glide Wax
$15.99 - $34.99
A new wax for the Cera Nova X line made a slightly harder than the old CH10 Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes it more durable than before. Good wax for base prep and training. For racing we recommend to go with fluoro wax in this temperature area. Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp: 120°C (248°F).
Swix LF10 Fluorocarbon Racing Glide Wax 180g
$69.99
+10ºC to 0ºC (50ºF to 32ºF). For very wet conditions. Also good for base preparation and to protect the bases when traveling. The snow is often dirty at the temperatures calling for LF10, therefore an overlayer of Cera F FC10 is recommended. Recommended iron temperature setting of 110ºC.
Swix LF10X Yellow Fluorocarbon Glide Wax
$24.99 - $69.99
Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp: 120°C (248°F). A new wax in for the Cera Nova X line made a little bit harder than the old LF10test result shows that a slightly harder wax performs better in this area, , especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. It’s a good wax for base prep wax, but also a great training wax. For racing we recommend to go with high fluoro wax in this temperature area, but with a powder on top LF10X can be used with a good result. The FC10X powder would then be the natural choice.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix LF12 Fluorocarbon Racing Glide Wax Pack 60g
$24.99
Combi-package that contains LF6 Blue 20 g, LF7 Violet 20 g, and LF8 Red 20 g.
Swix PS 5 Turquoise Glide Wax
$15.99 - $34.99
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. For conditions -10c to -18c The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X.
Swix PS 6 Blue Glide Wax
$15.99 - $34.99
PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. For conditions -6c to -12c The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X
Swix PS 7 Violet Glide Wax
$15.99 - $34.99
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. For conditions -2c to -8c The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X.
Swix PS Polar Glide Wax
$15.99 - $34.99
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. For conditions -14c to -32c The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. It's important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. Recommended iron temp: 155°C (311°F). Replaces the CHX4.
Swix LF8X Red Fluorocarbon Glide Wax
$24.99 - $59.99
Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. LF8, a great wax for both base-prep and training. It can also can be used as a race wax, preferably with Cera F powder on top. Easy to melt and very convenient to work with.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.When used as a base for Cera F, we recommend the FC08X powder.
Page 1 of 1